Switch Trendnet 10-Port Gigabit SFP PoE+ L3

2x RJ-45/SFP

• Power Budget: 75W
• 802.3at: Up to 30W per port
• PoE Mode A: Pins 1, 2, 3, and 6 for power
• PoE auto/manual classification
• PoE port priority/power scheduling
• PD alive check

• IEEE 802.1d/p/q/s/w/x
• IEEE 802.3u/x/z/ab/ad/az

• 802.1p Class of Service (CoS)
• DSCP (Differentiated Services Code Point)
• Bandwidth Control per port
• Queue Scheduling: Strict Priority, Weighted Round Robin (WRR)

• Static Link Aggregation
• 802.3ad Dynamic LACP

• Multiple management VLAN assignment
• Asymmetric VLAN
• 802.1Q Tagged VLAN
• Dynamic GVRP
• Up to 256 VLAN groups, ID Range 1-4094
• Private VLAN (Protected Ports)
• Voice VLAN (10 user defined OUIs)

• 802.1X Port-Based Network Access Control, RADIUS, TACACS+
• Local Dial In User Authentication
• DHCP Snooping (per VLAN)
• Loopback Detection
• Duplicated Address Detection
• Trusted Host
• Denial of Service (DoS)

• HTTP/HTTPS (SSL v2/3 TLS) Web based GUI
• SNMP v1, v2c, v3
• RMON v1
• Static Unicast MAC Address
• Enable/disable 802.3az Power Saving
• LLDP and LLDP-MED
• Virtual Cable Diagnostics Test
• IPv6: IPv6 Neighbor Discovery, IPv6 Static IP, DHCPv6, Auto configuration

• Configure, monitor, and manage through the TRENDnet Hive Cloud Management Portal remotely via PC or Mac web browser
• Multi-device management
• Provisioning through scheduled batch firmware or configuration updates for multiple switches
• Event/hardware network monitoring (CPU/memory utilization)
• Enable & disable PoE, set PD (powered device) alive check, configure PoE scheduling, and monitor PoE budget utilization (for PoE switches only)
• Configure features such as IP address settings, VLANs, spanning tree, loopback detection, IGMP snooping, link aggregation, and bandwidth control through cloud management

Quý khách đặt hàng
Vui lòng liên hệ Cty CP Công Nghệ NMS®
Hotline: 028.7100.8600 - Email: sales@nmsvn.com